Each major release is not binary compatible with the previous.
PR d/122800
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 7:0:0.
GNU ld gained separate Solaris-specific linker emulations (*_sol2) long
ago. Since their introduction, GCC has preferred them over their
non-*_sol2 counterparts but supported both forms. This has changed for
GCC 16: since all supported versions of GNU ld do support the *_sol2
emulations, GCC now uses them unconditionally.
libtool has also been updated to handle this since libtool 2.4.2 back in
2011. However, that change has only partially been backported to the
heavily patched libtool.m4 in the GCC tree: the sparcv9 part is there,
but the amd64 part is missing for some reason. This causes problems
with some recent binutils changes.
Therefore this patch cherry-picks the libtool patch to bring
Solaris/x86_64 in sync with Solaris/sparcv9 and upstream libtool.
Bootstrapped without regressions on {amd64,i386}-pc-solaris2.11 and
{sparcv9,sparc}-sun-solaris2.11.
2025-09-22 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* libtool.m4: Cherry-pick libtool commit
9196966580f6853a31187a7a3c7e7ff36ef08982.
gcc:
* configure: Regenerate.
libatomic:
* configure: Regenerate.
libbacktrace:
* configure: Regenerate.
libcc1:
* configure: Regenerate.
libffi:
* configure: Regenerate.
libga68:
* configure: Regenerate.
libgcobol:
* configure: Regenerate.
libgfortran:
* configure: Regenerate.
libgm2:
* configure: Regenerate.
libgomp:
* configure: Regenerate.
libgrust:
* configure: Regenerate.
libitm:
* configure: Regenerate.
libobjc:
* configure: Regenerate.
libphobos:
* configure: Regenerate.
libquadmath:
* configure: Regenerate.
libsanitizer:
* configure: Regenerate.
libssp:
* configure: Regenerate.
libstdc++-v3:
* configure: Regenerate.
libvtv:
* configure: Regenerate.
lto-plugin:
* configure: Regenerate.
zlib:
* configure: Regenerate.
This macro deduplicates the
$CC -v 2>&1 | sed -n 's/^Thread model: //p'
check that was occurring in various runtime libs.
Additionally, as a bit of an Easter egg, this also allows overriding
what the compiler would return by setting the
`gcc_cv_target_thread_file` cache variable first. I admit that it is in
fact this Easter egg that led me to write the patch. The use-case for it
is for making multilib builds where the library sets do not all share
the same thread model easier. See also `THREAD_MODEL_SPEC` for more
about the varying thread models use-case.
Arguably one could could try to define on `THREAD_MODEL_SPEC` on more
platforms (besides e.g. AIX) but the ramifications of this are a bit
unclear. Setting `gcc_cv_target_thread_file` directly is a "low tech"
solution that will work for now for sure. Of course, since setting a
cache variable like this a hacky trick, I will not expect this to be at
all stable/guaranteed to work, going forward.
Thanks to Arsen who on IRC discussed these things with me, including in
particular making it a cache var not `--with-model` flag, to not
prematurely foster expectations that this is stable.
Suggested-by: Arsen Arsenović <arsen@aarsen.me>
config/ChangeLog:
* gthr.m4: Create new GCC_AC_THREAD_MODEL macro
libatomic/ChangeLog:
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Use GCC_AC_THREAD_MODEL instead of hand-rolled
* testsuite/Makefile.in: Regenerate.
libgcc/ChangeLog:
* configure: Regenerate.
* configure.ac: Use GCC_AC_THREAD_MODEL instead of hand-rolled
libphobos/ChangeLog:
* configure: Regenerate.
* m4/druntime/os.m4: Use AC_MSG_ERROR, not private as_fn_error
libstdc++-v3/ChangeLog:
* acinclude.m4: Use GCC_AC_THREAD_MODEL instead, via AC_REQUIRE
* configure: Regenerate.
Adds a new i386 d_target_info_spec entry to handle requests for
`__traits(getTargetInfo, "CET")', and add predefined target version
`GNU_CET' when the option `-fcf-protecton' is used.
Both TargetInfo key and predefined version have been added to the D
front-end documentation.
In the library, `GNU_CET' replaces the existing use of the user-defined
version flag `CET' when building libphobos.
PR d/118654
gcc/ChangeLog:
* config/i386/i386-d.cc (ix86_d_target_versions): Predefine GNU_CET.
(ix86_d_handle_target_cf_protection): New.
(ix86_d_register_target_info): Add 'CET' TargetInfo key.
gcc/d/ChangeLog:
* implement-d.texi: Document CET version and traits key.
libphobos/ChangeLog:
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Remove CET_DFLAGS.
* libdruntime/Makefile.am: Replace CET_DFLAGS with CET_FLAGS.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/core/thread/fiber/package.d: Replace CET with GNU_CET.
* src/Makefile.am: Replace CET_DFLAGS with CET_FLAGS.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/testsuite_flags.in: Replace CET_DFLAGS with CET_FLAGS.
gcc/testsuite/ChangeLog:
* gdc.dg/target/i386/i386.exp: New test.
* gdc.dg/target/i386/targetinfo_CET.d: New test.
Each major release is not binary compatible with the previous.
PR d/117701
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 6:0:0.
Each major release is not binary compatible with the previous.
PR d/113667
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 5:0:0.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
These are the os support patches we have been grooming and maintaining
for quite a few years over on git.haiku-os.org. All of these
architectures are working and most have been stable for quite some time.
ChangeLog:
* configure: Regenerate.
* configure.ac: Add Haiku to list of ELF OSes
* libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
ChangeLog:
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog:
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
fixincludes/ChangeLog:
* configure: Regenerate.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
ChangeLog:
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/ChangeLog:
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
This change adds the configury bits to activate the build of
shared libs on VxWorks ports configured with --enable-shared,
for libraries variants where this is generally supported (rtp,
code model !large - currently not compatible with -fPIC).
Set lt_cv_deplibs_check_method in libtool.m4, so the build of
libraries know how to establish dependencies. This is useful in
configurations such as aarch64 where proper support of LSE relies
on accurate dependency information between libstdc++ and libgcc_s
to begin with.
Regenerate configure scripts to reflect libtool.m4 change.
2022-10-09 Olivier Hainque <hainque@adacore.com>
* libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker
and friends for rtp !large. Assume the linker has the required
abilities and set lt_cv_deplibs_check_method.
gcc/
* config.gcc (*vxworks*): Add t-slibgcc fragment
if enable_shared.
libgcc/
* config.host (*vxworks*): When enable_shared, add
libgcc and crtstuff "shared" fragments for rtp except
large code model.
(aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from
the list of fragments.
2022-10-09 Olivier Hainque <hainque@adacore.com>
gcc/
* configure: Regenerate.
libatomic/
* configure: Regenerate.
libbacktrace/
* configure: Regenerate.
libcc1/
* configure: Regenerate.
libffi/
* configure: Regenerate.
libgfortran/
* configure: Regenerate.
libgomp/
* configure: Regenerate.
libitm/
* configure: Regenerate.
libobjc/
* configure: Regenerate.
liboffloadmic/
* configure: Regenerate.
liboffloadmic/
* plugin/configure: Regenerate.
libphobos/
* configure: Regenerate.
libquadmath/
* configure: Regenerate.
libsanitizer/
* configure: Regenerate.
libssp/
* configure: Regenerate.
libstdc++-v3/
* configure: Regenerate.
libvtv/
* configure: Regenerate.
lto-plugin/
* configure: Regenerate.
zlib/
* configure: Regenerate.
In upstream dmd, the compiler front-end and run-time have been merged
together into one repository. Both dmd and libdruntime now track that.
D front-end changes:
- Deprecated `scope(failure)' blocks that contain `return' statements.
- Deprecated using integers for `version' or `debug' conditions.
- Deprecated returning a discarded void value from a function.
- `new' can now allocate an associative array.
D runtime changes:
- Added avx512f detection to core.cpuid module.
Phobos changes:
- Changed std.experimental.logger.core.sharedLog to return
shared(Logger).
gcc/d/ChangeLog:
* dmd/MERGE: Merge upstream dmd d7772a2369.
* dmd/VERSION: Bump version to v2.100.1.
* d-codegen.cc (get_frameinfo): Check whether decision to generate
closure changed since semantic finished.
* d-lang.cc (d_handle_option): Remove handling of -fdebug=level and
-fversion=level.
* decl.cc (DeclVisitor::visit (VarDeclaration *)): Generate evaluation
of noreturn variable initializers before throw.
* expr.cc (ExprVisitor::visit (AssignExp *)): Don't generate
assignment for noreturn types, only evaluate for side effects.
* lang.opt (fdebug=): Undocument -fdebug=level.
(fversion=): Undocument -fversion=level.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 4:0:0.
* libdruntime/MERGE: Merge upstream druntime d7772a2369.
* libdruntime/Makefile.am (DRUNTIME_DSOURCES): Add
core/internal/array/duplication.d.
* libdruntime/Makefile.in: Regenerate.
* src/MERGE: Merge upstream phobos 5748ca43f.
* testsuite/libphobos.gc/nocollect.d:
libphobos is currently only enabled on Solaris/x86 with gas. As
discovered when gdc was switched to the dmd frontend, this initially
broke bootstrap for the other Solaris configurations.
However, it's now well possible to enable it both for Solaris/x86 with
as and Solaris/SPARC (both as and gas) since the original problems (x86
as linelength limit, among others) are long gone.
The following patch does just that.
Tested on i386-pc-solaris2.11 and sparc-sun-solaris2.11 (both as and
gas) with gdc 9.3.0 (x86) resp. 9.4.0 (sparc, configured with
--enable-libphobos) as bootstrap compilers.
2021-12-01 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
libphobos:
PR d/103528
* configure.ac <x86_64-*-solaris2.* | i?86-*-solaris2.*>: Remove
gas requirement.
* configure: Regenerate.
* configure.tgt (sparc*-*-solaris2.11*): Mark supported.
Tests for `-ffunction-sections -fdata-sections' and sets SECTION_FLAGS
accordingly. If there is no warning when using it, take advantage of
the smaller executables that can be had with `--gc-sections'.
libphobos/ChangeLog:
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call DRUNTIME_SECTION_FLAGS.
* libdruntime/Makefile.am: Add SECTION_FLAGS to AM_DFLAGS.
* libdruntime/Makefile.in: Regenerate.
* m4/druntime.m4 (DRUNTIME_SECTION_FLAGS): New macro.
* src/Makefile.am: Add SECTION_FLAGS to AM_DFLAGS.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
The libgdruntime_convenience library was built with `-fversion=Shared',
but the libphobos part wasn't when creating the static library.
As there are no issues compiling in Shared code into the static library,
to avoid mismatches the flag is now always present when --enable-shared
is turned on. Libtool's compiler PIC D flag is now the combination of
compiler PIC and D Shared flags, and AM_DFLAGS passes `-prefer-pic' to
libtool unless --enable-shared is turned off.
libphobos/ChangeLog:
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Substitute enable_shared, enable_static, and
phobos_lt_pic_flag.
* libdruntime/Makefile.am (AM_DFLAGS): Replace
phobos_compiler_pic_flag with phobos_lt_pic_flags, and
phobos_compiler_shared_flag.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am (AM_DFLAGS): Replace phobos_compiler_pic_flag
with phobos_lt_pic_flag, and phobos_compiler_shared_flag.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/libphobos.druntime_shared/druntime_shared.exp: Remove
-fversion=Shared and -fno-moduleinfo from default extra test flags.
* testsuite/libphobos.phobos_shared/phobos_shared.exp: Likewise.
* testsuite/testsuite_flags.in: Add phobos_compiler_shared_flag to
--gdcflags.
The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
gcc/ChangeLog:
PR target/97865
* configure: Regenerate.
libatomic/ChangeLog:
PR target/97865
* configure: Regenerate.
libbacktrace/ChangeLog:
PR target/97865
* configure: Regenerate.
libffi/ChangeLog:
PR target/97865
* configure: Regenerate.
libgfortran/ChangeLog:
PR target/97865
* configure: Regenerate.
libgomp/ChangeLog:
PR target/97865
* configure: Regenerate.
libhsail-rt/ChangeLog:
PR target/97865
* configure: Regenerate.
libobjc/ChangeLog:
PR target/97865
* configure: Regenerate.
libphobos/ChangeLog:
PR target/97865
* configure: Regenerate.
libquadmath/ChangeLog:
PR target/97865
* configure: Regenerate.
libssp/ChangeLog:
PR target/97865
* configure: Regenerate.
libstdc++-v3/ChangeLog:
PR target/97865
* configure: Regenerate.
libvtv/ChangeLog:
PR target/97865
* configure: Regenerate.
zlib/ChangeLog:
PR target/97865
* configure: Regenerate.
When libphobos is configured with --enable-cet, this adds extra fields
to the Fiber class to support the ucontext_t fallback implementation.
These fields get omitted when compiling user code unless they also used
`-fversion=CET' to build their project, which resulted in data being
overwritten from within swapcontext().
On reviewing the ucontext_t definitions, it was found that the shadow
stack fields were missing, and the struct size didn't match up on X32.
This has been fixed in upstream druntime and merged down here.
Reviewed-on: https://github.com/dlang/druntime/pull/3293
libphobos/ChangeLog:
PR d/98025
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (DCFG_ENABLE_CET): Substitute.
* libdruntime/MERGE: Merge upstream druntime 0fe7974c.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/core/thread.d: Import gcc.config.
(class Fiber): Add ucontext_t fields when GNU_Enable_CET is true.
* libdruntime/gcc/config.d.in (GNU_Enable_CET): Define.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
This is so that the library is not to conflict with gcc-10.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 2:0.0.
The first implementation hit a front-end implementation bug where
version conditions are resolved ahead of static if confitions.
The logic for whether to use asm implemented fiber_switchContext or
libc's swapcontext has been moved from GNU_Enable_CET to version CET.
libphobos/ChangeLog:
PR d/95680
PR d/97007
* Makefile.am (AM_MAKEFLAGS): Remove $(CET_FLAGS).
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (DCFG_ENABLE_CET): Remove substitution.
(CET_DFLAGS): Substitute.
* libdruntime/Makefile.am (AM_DFLAGS): Add $(CET_DFLAGS).
(AM_CFLAGS): Add $(CET_FLAGS).
(AM_CCASFLAGS): Likewise.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/core/thread.d: Replace static if GNU_Enable_CET
condition with `version (CET)'.
* libdruntime/gcc/config.d.in (GNU_Enable_CET): Remove.
* src/Makefile.am (AM_DFLAGS): Add $(CET_DFLAGS).
(AM_CFLAGS): Add $(CET_FLAGS).
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/testsuite_flags.in: Add $(CET_DFLAGS) to --gdcflags.
Rather than implementing support within D runtime itself, use libc
getcontext/swapcontext functions if CET is enabled.
Removes whatever CET support was in the switchContext routine for x86
D runtime, along with setting version AsmExternal, so that the fallback
ucontext_t implementation is used, which is capable of doing shadow
stack handling.
libphobos/ChangeLog:
PR d/95680
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (DCFG_ENABLE_CET): Substitute.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/config/x86/switchcontext.S: Remove CET support code.
* libdruntime/core/thread.d: Import gcc.config. Don't set version
AsmExternal when GNU_Enable_CET is true.
* libdruntime/gcc/config.d.in (GNU_Enable_CET): Define.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
When --enable-cet is used to configure GCC, enable Intel CET in libphobos.
* Makefile.am (AM_MAKEFLAGS): Add $(CET_FLAGS) to GCC FLAGS.
* configure.ac (CET_FLAGS): Add GCC_CET_FLAGS and AC_SUBST.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure.ac: Likewise.
Multilibs should not have been split up as two logically different CPU,
so at configure time, powerpc64 was being detected, but none of the
32-bit support files were being compiled in.
libphobos/ChangeLog:
PR d/94825
* configure: Regenerate.
* libdruntime/Makefile.am (DRUNTIME_SOURCES_CONFIGURED): Add both
switchcontext.S and callwithstack.S if DRUNTIME_CPU_POWERPC.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/config/powerpc/switchcontext.S: Add !__PPC64__ guards.
* libdruntime/config/powerpc64/callwithstack.S: Add __PPC64__ guards.
* m4/druntime/cpu.m4 (DRUNTIME_CPU_SOURCES): Define DRUNTIME_CPU_POWER
for all powerpc biarchs. Remove DRUNTIME_CPU_POWER64 conditional.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.tgt: Add power*-*-linux* as a supported target, only
building libdruntime.
* m4/druntime/cpu.m4 (DRUNTIME_CPU_SOURCES): Add cases for powerpcle
and powerpc64le target cpus.
Always run testsuite with same GDCFLAGS as used in build.
libphobos/ChangeLog:
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Remove GDCFLAGSX.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/testsuite_flags.in: Use GDCFLAGS in --gdcflags.
* testsuite/libphobos.thread/fiber_guard_page.d: Test using -O0.
The intended purpose of the option is both for targets that don't
support phobos yet, and for gdc itself to support bootstrapping itself
as a self-hosted D compiler.
The libphobos testsuite has been updated to only add libphobos to the
search paths if it's being built. A new D2 testsuite directive
RUNNABLE_PHOBOS_TEST has also been patched in to disable some runnable
tests that have phobos dependencies, of which is a temporary measure
until upstream DMD fixes or removes these tests entirely.
gcc/testsuite/ChangeLog:
* lib/gdc-utils.exp (gdc-convert-test): Add dg-skip-if for tests that
depending on the phobos standard library.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Add --with-libphobos-druntime-only option and the
conditional ENABLE_LIBDRUNTIME_ONLY.
* configure.tgt: Define LIBDRUNTIME_ONLY.
* src/Makefile.am: Add phobos sources if not ENABLE_LIBDRUNTIME_ONLY.
* src/Makefile.in: Regenerate.
* testsuite/testsuite_flags.in: Add phobos path if compiling phobos.
This is yet another old option that would have been somewhat useful back
before the D front-end implementation was able to support compiling
without the Druntime library.
Now however, -fno-druntime makes the gcstub package redundant, so the
option has been removed, along with the package itself.
libphobos/ChangeLog:
* configure: Regenerate.
* libdruntime/Makefile.am (ALL_DRUNTIME_INSTALL_DSOURCES): Remove
DRUNTIME_DSOURCES_GC and DRUNTIME_DSOURCES_GCSTUB.
(DRUNTIME_DSOURCES): Add gc/*.d sources.
(DRUNTIME_DSOURCES_GC): Remove.
(DRUNTIME_DSOURCES_GCSTUB): Remove.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/gcstub/gc.d: Remove.
* m4/druntime.m4 (DRUNTIME_GC): Remove.
As GDCFLAGS is overriden by the top-level make file with '-O2 -g',
libphobos ends up always being built with all contracts, invariants, and
asserts compiled in. This adds a new configurable that defaults to omit
compiling any run-time checks into the library using '-frelease'.
Other choices either set the flags '-fno-release', enabling all run-time
checks, or '-fassert', which only compiles in asserts.
The omission of compiling in contracts results in a smaller library
size, with faster build times.
libphobos/ChangeLog:
PR d/94305
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Add --enable-libphobos-checking and substitute
CHECKING_DFLAGS. Remove -frelease from GDCFLAGS.
* libdruntime/Makefile.am: Add CHECKING_DFLAGS to AM_DFLAGS.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Add CHECKING_DFLAGS to AM_DFLAGS.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/testsuite_flags.in: Add -fno-release -funittest to
--gdcflags.
This is another old option that doesn't make sense as a configurable.
So the option has been removed, and the check for AC_SEARCH_LIBS moved
into the main configure.ac file.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Use AC_SEARCH_LIBS for pthread_create.
* m4/druntime/libraries.m4: Remove DRUNTIME_LIBRARIES_THREAD.
