GNU ld gained separate Solaris-specific linker emulations (*_sol2) long
ago. Since their introduction, GCC has preferred them over their
non-*_sol2 counterparts but supported both forms. This has changed for
GCC 16: since all supported versions of GNU ld do support the *_sol2
emulations, GCC now uses them unconditionally.
libtool has also been updated to handle this since libtool 2.4.2 back in
2011. However, that change has only partially been backported to the
heavily patched libtool.m4 in the GCC tree: the sparcv9 part is there,
but the amd64 part is missing for some reason. This causes problems
with some recent binutils changes.
Therefore this patch cherry-picks the libtool patch to bring
Solaris/x86_64 in sync with Solaris/sparcv9 and upstream libtool.
Bootstrapped without regressions on {amd64,i386}-pc-solaris2.11 and
{sparcv9,sparc}-sun-solaris2.11.
2025-09-22 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* libtool.m4: Cherry-pick libtool commit
9196966580f6853a31187a7a3c7e7ff36ef08982.
gcc:
* configure: Regenerate.
libatomic:
* configure: Regenerate.
libbacktrace:
* configure: Regenerate.
libcc1:
* configure: Regenerate.
libffi:
* configure: Regenerate.
libga68:
* configure: Regenerate.
libgcobol:
* configure: Regenerate.
libgfortran:
* configure: Regenerate.
libgm2:
* configure: Regenerate.
libgomp:
* configure: Regenerate.
libgrust:
* configure: Regenerate.
libitm:
* configure: Regenerate.
libobjc:
* configure: Regenerate.
libphobos:
* configure: Regenerate.
libquadmath:
* configure: Regenerate.
libsanitizer:
* configure: Regenerate.
libssp:
* configure: Regenerate.
libstdc++-v3:
* configure: Regenerate.
libvtv:
* configure: Regenerate.
lto-plugin:
* configure: Regenerate.
zlib:
* configure: Regenerate.
This was missed with r16-5786-g8de45537d29ee1.
Pushed as obvious.
libcc1/ChangeLog:
* cc1plugin-config.h.in: Regenerate.
Signed-off-by: Andrew Pinski <andrew.pinski@oss.qualcomm.com>
The basename() function is declared in libgen.h.
2025-11-30 John David Anglin <danglin@gcc.gnu.org>
libcc1/ChangeLog:
* configure.ac: Check for libgen.h header.
* configure: Regenerate.
'make tags' currently fails for libcc1 with this:
*** No rule to make target `marshall-c.hh', needed by `tags-am'. Stop.
The problem is that while marshall-c.hh has been removed via
r12-454-g25d1a6ecdc443f, it's still part of the libcc1_la_SOURCES
variable, hence the 'tags' target has a dependency on it.
This patch simply removes the marshall_c_source variable, that should be
empty.
libcc1/ChangeLog:
* Makefile.am: Remove reference to deleted marshall-c.h.
* Makefile.in: Regenerate.
By [module.interface] p3, if an exported declaration is not within a
header unit, it shall not declare a name with internal linkage.
Unfortunately we cannot just do this within set_originating_module,
since at the locations its called the linkage for declarations are not
always fully determined yet. We could move the calls but this causes
the checking assertion to fail as the originating module declaration may
have moved, and in general for some kinds of declarations it's not
always obvious where it should be moved to.
This patch instead introduces a new function to check that the linkage
of a declaration within a module is correct, to be called for all
declarations once their linkage is fully determined.
As a drive-by fix this patch also improves the source location of
namespace aliases to point at the identifier rather than the terminating
semicolon.
gcc/cp/ChangeLog:
* cp-tree.h (check_module_decl_linkage): Declare.
* decl2.cc (finish_static_data_member_decl): Check linkage.
* module.cc (set_originating_module): Adjust comment.
(check_module_decl_linkage): New function.
* name-lookup.cc (do_namespace_alias): Build alias with
specified location, check linkage.
(pushtag): Check linkage.
(push_namespace): Slightly clarify error message.
* name-lookup.h (do_namespace_alias): Add location parameter.
* parser.cc (cp_parser_namespace_alias_definition): Pass
identifier location to do_namespace_alias.
(cp_parser_alias_declaration): Check linkage.
(cp_parser_init_declarator): Check linkage.
(cp_parser_function_definition_after_declarator): Check linkage.
(cp_parser_save_member_function_body): Check linkage.
* pt.cc (finish_concept_definition): Mark as public, check
linkage.
libcc1/ChangeLog:
* libcp1plugin.cc (plugin_add_namespace_alias): Call
do_namespace_alias with input_location.
gcc/testsuite/ChangeLog:
* g++.dg/modules/export-3.C: Adjust error message.
* g++.dg/modules/export-6.C: New test.
Signed-off-by: Nathaniel Shead <nathanieloshead@gmail.com>
Reviewed-by: Jason Merrill <jason@redhat.com>
The diagnostic_starter and diagnostic_finalizer callbacks and most of
their support subroutines are only used by the "text" output format.
Emphasize this and reduce the binding with diagnostic_context
by renaming the callbacks to add "_text" in their names, and converting
the first param from diagnostic_context * to
diagnostic_text_output_output &. Update the various subroutines used
by diagnostic starter/finalizer callbacks to also take a
diagnostic_text_output_output & rather than a diagnostic_context *.
Move m_includes and m_last_seen from the context to the text output.
Use the text_output's get_printer () rather than the context's
m_printer, which should ease the transition to multiple output sinks.
No functional change intended.
gcc/c-family/ChangeLog:
PR other/116613
* c-opts.cc: Include "diagnostic-format-text.h".
(c_diagnostic_finalizer): Rename to...
(c_diagnostic_text_finalizer): ...this. Convert first param
from diagnostic_context * to diagnostic_text_output_format & and
update accordingly.
(c_common_diagnostics_set_defaults): Update for renamings.
gcc/ChangeLog:
PR other/116613
* coretypes.h (class diagnostic_text_output_format): Add forward
decl.
* diagnostic-format-json.cc
(json_output_format::after_diagnostic): New.
* diagnostic-format-sarif.cc
(sarif_output_format::after_diagnostic): New.
* diagnostic-format-text.cc: Use pragmas to ignore -Wformat-diag.
(diagnostic_text_output_format::~diagnostic_text_output_format):
Use get_printer. Clean up m_includes_seen here, rather than
in ~diagnostic_context.
(diagnostic_text_output_format::on_report_diagnostic): Use
get_printer. Update for callback renamings and pass *this
to them, rather than &m_context.
(diagnostic_text_output_format::after_diagnostic): New.
(diagnostic_text_output_format::includes_seen_p): Move here
from diagnostic_context/diagnostic.cc.
(diagnostic_text_output_format::get_location_text): New.
(maybe_line_and_column): Move here from diagnostic.cc and make
non-static.
(diagnostic_text_output_format::report_current_module): Move
here from diagnostic_context/diagnostic.cc.
(default_diagnostic_text_starter): Move here from diagnostic.cc,
renaming from default_diagnostic_starter.
(default_diagnostic_text_finalizer): Likewise, renaming from
default_diagnostic_finalizer.
* diagnostic-format-text.h
(diagnostic_text_output_format::diagnostic_text_output_format):
Initialize m_last_module and m_includes_seen.
(diagnostic_text_output_format::after_diagnostic): New decl.
(diagnostic_text_output_format::build_prefix): New decl.
(diagnostic_text_output_format::report_current_module): New decl.
(diagnostic_text_output_format::append_note): New decl.
(diagnostic_text_output_format::file_name_as_prefix): New decl.
(diagnostic_text_output_format::print_path): New decl.
(diagnostic_text_output_format::show_column_p): New decl.
(diagnostic_text_output_format::get_location_text): New decl.
(diagnostic_text_output_format::includes_seen_p): New decl.
(diagnostic_text_output_format::show_any_path): New decl.
(diagnostic_text_output_format::m_last_module): New field.
(diagnostic_text_output_format::m_includes_seen): New field.
* diagnostic-format.h
(diagnostic_output_format::after_diagnostic): New vfunc.
(diagnostic_output_format::get_context): New.
(diagnostic_output_format::get_diagram_theme): New.
* diagnostic-macro-unwinding.cc: Include
"diagnostic-format-text.h".
(maybe_unwind_expanded_macro_loc): Convert first param from
diagnostic_context * to diagnostic_text_output_format & and update
accordingly.
(virt_loc_aware_diagnostic_finalizer): Likewise.
* diagnostic-macro-unwinding.h
(virt_loc_aware_diagnostic_finalizer): Likewise.
(maybe_unwind_expanded_macro_loc): Likewise.
* diagnostic-path.cc: Include "diagnostic-format-text.h".
(path_label::path_label): Drop "ctxt" param and add "colorize"
and "allow_emojis" params. Update initializations.
(path_label::get_text): Use m_colorize rather than querying
m_ctxt.m_printer. Use m_allow_emojis rather than querying
m_ctxt's diagram theme.
(path_label::m_ctxt): Drop field.
(path_label::m_colorize): Drop field.
(path_label::m_allow_emojis): Drop field.
(event_range::event_range): Drop param "ctxt". Add params
"colorize_labels" and "allow_emojis".
(event_range::print): Convert first param from
diagnostic_context & to diagnostic_text_output_format & and update
accordingly.
(path_summary::path_summary): Likewise.
(path_summary::print_swimlane_for_event_range): Likewise.
(print_path_summary_as_text): Likewise for 3rd param.
(diagnostic_context::print_path): Convert to...
(diagnostic_text_output_format::print_path): ...this.
(selftest::test_empty_path): Update to use a
diagnostic_text_output_format.
(selftest::test_intraprocedural_path): Likewise.
(selftest::test_interprocedural_path_1): Likewise.
(selftest::test_interprocedural_path_2): Likewise.
(selftest::test_recursion): Likewise.
(selftest::test_control_flow_1): Likewise.
(selftest::test_control_flow_2): Likewise.
(selftest::test_control_flow_3): Likewise.
(selftest::assert_cfg_edge_path_streq): Likewise.
(selftest::test_control_flow_5): Likewise.
(selftest::test_control_flow_6): Likewise.
* diagnostic.cc (file_name_as_prefix): Convert to...
(diagnostic_text_output_format::file_name_as_prefix): ...this.
(diagnostic_context::initialize): Update for renamings.
Move m_last_module and m_includes_seen into text output.
(diagnostic_context::finish): Likewise.
(diagnostic_context::get_location_text): Add "colorize" param.
(diagnostic_build_prefix): Convert to...
(diagnostic_text_output_format::build_prefix): ...this.
(diagnostic_context::includes_seen_p): Move from here to
diagnostic_text_output_format/diagnostic-format-text.cc.
(diagnostic_context::report_current_module): Likewise.
(diagnostic_context::show_any_path): Convert to...
(diagnostic_text_output_format::show_any_path): ...this.
(default_diagnostic_starter): Rename and move to
diagnostic-format-text.cc.
(default_diagnostic_start_span_fn): Pass colorize bool
to get_location_text.
(default_diagnostic_finalizer): Rename and move to
diagnostic-format-text.cc.
(diagnostic_context::report_diagnostic): Replace call to
show_any_path with call to new output format "after_diagnostic"
vfunc, moving show_any_path call to the text output format.
(diagnostic_append_note): Convert to...
(diagnostic_text_output_format::append_note): ...this.
(selftest::assert_location_text): Pass in false for colorization.
* diagnostic.h (diagnostic_starter_fn): Rename to...
(diagnostic_text_starter_fn): ...this. Convert first param from
diagnostic_context * to diagnostic_text_output_format &.
(diagnostic_finalizer_fn, diagnostic_text_finalizer_fn): Likewise.
(diagnostic_context): Update friends for renamings.
(diagnostic_context::report_current_module): Move to text output
format.
(diagnostic_context::get_location_text): Add "colorize" bool.
(diagnostic_context::includes_seen_p): Move to text output format.
(diagnostic_context::show_any_path): Likewise.
(diagnostic_context::print_path): Likewise.
(diagnostic_context::m_text_callbacks): Update for renamings.
(diagnostic_context::m_last_module): Move to text output format.
(diagnostic_context::m_includes_seen): Likewise.
(diagnostic_starter): Rename to...
(diagnostic_text_starter): ...this and update return type.
(diagnostic_finalizer): Rename to...
(diagnostic_text_finalizer): ...this and update return type.
(diagnostic_report_current_module): Drop decl in favor of a member
function of diagnostic_text_output_format.
(diagnostic_append_note): Likewise.
(default_diagnostic_starter): Rename to...
(default_diagnostic_text_starter): ...this, updating type.
(default_diagnostic_finalizer): Rename to...
(default_diagnostic_text_finalizer): ...this, updating type.
(file_name_as_prefix): Drop decl.
* langhooks-def.h (lhd_print_error_function): Convert first param
from diagnostic_context * to diagnostic_text_output_format &.
* langhooks.cc: Include "diagnostic-format-text.h".
(lhd_print_error_function): Likewise. Update accordingly
* langhooks.h (lang_hooks::print_error_function): Convert first
param from diagnostic_context * to
diagnostic_text_output_format &.
* tree-diagnostic.cc: Include "diagnostic-format-text.h".
(diagnostic_report_current_function): Convert first param from
diagnostic_context * to diagnostic_text_output_format & and update
accordingly.
(default_tree_diagnostic_starter): Rename to...
(default_tree_diagnostic_text_starter): ...this. Convert first
param from diagnostic_context * to diagnostic_text_output_format &
and update accordingly.
(tree_diagnostics_defaults): Update for renamings.
gcc/cp/ChangeLog:
PR other/116613
* cp-tree.h (cxx_print_error_function): Convert first param
from diagnostic_context * to diagnostic_text_output_format &.
* error.cc: Include "diagnostic-format-text.h".
(cxx_initialize_diagnostics): Update for renamings.
(cxx_print_error_function): Convert first param from
diagnostic_context * to diagnostic_text_output_format & and update
accordingly
(cp_diagnostic_starter): Rename to...
(cp_diagnostic_text_starter): ...this. Convert first
param from diagnostic_context * to diagnostic_text_output_format &
and update accordingly.
(cp_print_error_function): Likewise.
(print_instantiation_full_context): Likewise.
(print_instantiation_partial_context_line): Likewise.
(print_instantiation_partial_context): Likewise.
(maybe_print_instantiation_context): Likewise.
(maybe_print_constexpr_context): Likewise.
(print_location): Likewise.
(print_constrained_decl_info): Likewise.
(print_concept_check_info): Likewise.
(print_constraint_context_head): Likewise.
(print_requires_expression_info): Likewise.
(maybe_print_single_constraint_context): Likewise.
gcc/fortran/ChangeLog:
PR other/116613
* error.cc: Include "diagnostic-format-text.h".
(gfc_diagnostic_starter): Rename to...
(gfc_diagnostic_text_starter): ...this. Convert first
param from diagnostic_context * to diagnostic_text_output_format &
and update accordingly.
(gfc_diagnostic_finalizer, gfc_diagnostic_text_finalizer):
Likewise.
(gfc_diagnostics_init): Update for renamings.
(gfc_diagnostics_finish): Likewise.
gcc/jit/ChangeLog:
PR other/116613
* dummy-frontend.cc: Include "diagnostic-format-text.h".
(jit_begin_diagnostic): Convert first param from
diagnostic_context * to diagnostic_text_output_format &
(jit_end_diagnostic): Likewise. Update accordingly.
(jit_langhook_init): Update for renamings.
gcc/rust/ChangeLog:
PR other/116613
* resolve/rust-ast-resolve-expr.cc
(funny_ice_finalizer): : Convert first param from
diagnostic_context * to diagnostic_text_output_format &.
(ResolveExpr::visit): Update for renaming.
gcc/testsuite/ChangeLog:
PR other/116613
* g++.dg/plugin/show_template_tree_color_plugin.c
(noop_starter_fn): Rename to...
(noop_text_starter_fn): ...this. Update first param from dc to
text_output.
(plugin_init): Update for renamings.
* gcc.dg/plugin/diagnostic_group_plugin.c
(test_diagnostic_starter): Rename to...
(test_diagnostic_text_starter): ...this. Update first param from
dc to text_output.
(plugin_init): Update for renaming.
* gcc.dg/plugin/diagnostic_plugin_test_show_locus.c: Include
"diagnostic-format-text.h".
(custom_diagnostic_finalizer): Rename to...
(custom_diagnostic_text_finalizer): ...this. Update first param
from dc to text_output.
(test_show_locus): Update for renamings.
* gcc.dg/plugin/location_overflow_plugin.c: Include
"diagnostic-format-text.h".
(original_finalizer): Rename to...
(original_text_finalizer): ...this and update type.
(verify_unpacked_ranges): Update first param from dc to
text_output. Update for this and for renamings.
(verify_no_columns): Likewise.
(plugin_init): Update for renamings.
libcc1/ChangeLog:
PR other/116613
* context.cc: Include "diagnostic-format-text.h".
(plugin_print_error_function): Update first param from
diagnostic_context * to diagnostic_text_output_format &.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Use INCLUDE_VECTOR before including system.h, instead of directly
including <vector>, to avoid running into poisoned identifiers.
Signed-off-by: Dimitry Andric <dimitry@andric.com>
libcc1/ChangeLog:
PR middle-end/111632
* libcc1plugin.cc: Fix include.
* libcp1plugin.cc: Fix include.
PR libcc1/113977 points out a case where a simple expression is
rejected with a compiler error message. The bug here is that gdb does
not inform the plugin of the correct alignment -- in fact, there is no
way to do that.
This patch adds a new method to allow the alignment to be set, and
bumps the C front end protocol version.
It also includes some updates to various comments in 'include', done
here to simplify the merge to binutils-gdb.
include
* gcc-cp-interface.h (gcc_cp_fe_context_function): Update
comment.
* gcc-c-interface.h (enum gcc_c_api_version) <GCC_C_FE_VERSION_2>:
New constant.
(gcc_c_fe_context_function): Update comment.
* gcc-c-fe.def (finish_record_with_alignment): New method.
Update documentation.
libcc1
PR libcc1/113977
* libcc1plugin.cc (plugin_finish_record_or_union): New function.
(plugin_finish_record_or_union): Rewrite.
(plugin_init): Use GCC_C_FE_VERSION_2.
* libcc1.cc (c_vtable): Use GCC_C_FE_VERSION_2.
(gcc_c_fe_context): Check for GCC_C_FE_VERSION_2.
This fixes version negotiation in the libcc1 plugins. It's done in a
simple way: the version number from the context object is now passed
to base_gdb_plugin.
The idea behind this is that when the client (gdb) requests version N,
the plugin should respond with the newest version that it knows of
that is backward compatible to N. That is, the connection can be
upgraded. Note that the protocol does not change much, and no
backward incompatibilities have ever been needed.
The C plugin is also changed to advertise GCC_C_FE_VERSION_1.
The version negotiation approach should of course be documented, but I
did that in a subsequent patch, in order to only have one patch
touching the 'include' directory and thus needing a merge to
binutils-gdb.
libcc1
* libcp1.cc (libcp1::libcp1): Use FE version number from context.
* libcc1.cc (libcc1::libcc1): Use FE version number from context.
(c_vtable): Use GCC_C_FE_VERSION_1.
While working on another patch, I discovered that the libcc1 plugin
code never did version negotiation correctly. So, the patches to
introduce v1 never did anything -- the new code, as far as I know, has
never been run.
Making version negotiation work shows that the existing code causes
crashes. For example, safe_lookup_builtin_type might return
error_mark_node in some cases, which the callers aren't prepared to
accept.
Looking into it some more, I couldn't find any justification for this
v1 code for the C compiler plugin. Since it's not run at all, it's
also clear that removing it doesn't cause any regressions in gdb.
However, rather than remove it, this patch changes it to handle
ERROR_MARK better, and then to fall back to the v0 code if the new
code fails to find the type it's looking for.
libcc1
* libcc1plugin.cc (safe_lookup_builtin_type): Handle ERROR_MARK.
(plugin_int_type): Fall back to plugin_int_type_v0.
(plugin_float_type): Fall back to plugin_float_type_v0.
Here the problem is that we give hard errors while substituting
template parameters during overload resolution of is_throwable
which has an invalid throw in decltype.
The backtrace shows that fn_type_unification -> instantiate_template
-> tsubst* passes complain=0 as expected, but build_throw doesn't
have a complain parameter. So let's add one. Also remove a redundant
local variable which I should have removed in my P2266 patch.
There's still one problem for which I opened <https://gcc.gnu.org/PR113853>.
We need to patch up treat_lvalue_as_rvalue_p and remove the dg-bogus.
Thanks to Patrick for notifying me of this PR. This doesn't fully fix
113789; there I think I'll have to figure our why a candidate wasn't
discarded from the overload set.
PR c++/98388
gcc/cp/ChangeLog:
* coroutines.cc (coro_rewrite_function_body): Pass tf_warning_or_error
to build_throw.
(morph_fn_to_coro): Likewise.
* cp-tree.h (build_throw): Adjust.
* except.cc (expand_end_catch_block): Pass tf_warning_or_error to
build_throw.
(build_throw): Add a tsubst_flags_t parameter. Use it. Remove
redundant variable. Guard an inform call.
* parser.cc (cp_parser_throw_expression): Pass tf_warning_or_error
to build_throw.
* pt.cc (tsubst_expr) <case THROW_EXPR>: Pass complain to build_throw.
libcc1/ChangeLog:
* libcp1plugin.cc (plugin_build_unary_expr): Pass tf_error to
build_throw.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/sfinae69.C: New test.
The gdb tests of the libcc1 plugin have been failing lately. I
tracked this down to a crash trying to access an enum's underlying
type. This patch fixes the crash by setting this type.
* libcc1plugin.cc (plugin_build_enum_type): Set
ENUM_UNDERLYING_TYPE.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
The GCC_ENABLE_PLUGINS configure logic for detecting whether -rdynamic
is necessary and supported uses an appropriate objdump for $host
binaries (running on $build) in cases where $host is $build or
$target.
However, it is missing such logic in the case where $host is neither
$build nor $target, resulting in the compilers not being linked with
-rdynamic and plugins not being usable with such a compiler. In fact
$ac_cv_prog_OBJDUMP, as used when $build = $host, is always an objdump
for $host binaries that runs on $build; that is, it's appropriate to
use in this case as well.
Tested in such a configuration that it does result in cc1 being linked
with -rdynamic as expected. Also bootstrapped with no regressions for
x86_64-pc-linux-gnu.
config/
* gcc-plugin.m4 (GCC_ENABLE_PLUGINS): Use
export_sym_check="$ac_cv_prog_OBJDUMP -T" also when host is not
build or target.
gcc/
* configure: Regenerate.
libcc1/
* configure: Regenerate.
These are the os support patches we have been grooming and maintaining
for quite a few years over on git.haiku-os.org. All of these
architectures are working and most have been stable for quite some time.
ChangeLog:
* configure: Regenerate.
* configure.ac: Add Haiku to list of ELF OSes
* libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
ChangeLog:
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog:
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
fixincludes/ChangeLog:
* configure: Regenerate.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
ChangeLog:
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/ChangeLog:
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
