GNU ld gained separate Solaris-specific linker emulations (*_sol2) long
ago. Since their introduction, GCC has preferred them over their
non-*_sol2 counterparts but supported both forms. This has changed for
GCC 16: since all supported versions of GNU ld do support the *_sol2
emulations, GCC now uses them unconditionally.
libtool has also been updated to handle this since libtool 2.4.2 back in
2011. However, that change has only partially been backported to the
heavily patched libtool.m4 in the GCC tree: the sparcv9 part is there,
but the amd64 part is missing for some reason. This causes problems
with some recent binutils changes.
Therefore this patch cherry-picks the libtool patch to bring
Solaris/x86_64 in sync with Solaris/sparcv9 and upstream libtool.
Bootstrapped without regressions on {amd64,i386}-pc-solaris2.11 and
{sparcv9,sparc}-sun-solaris2.11.
2025-09-22 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* libtool.m4: Cherry-pick libtool commit
9196966580f6853a31187a7a3c7e7ff36ef08982.
gcc:
* configure: Regenerate.
libatomic:
* configure: Regenerate.
libbacktrace:
* configure: Regenerate.
libcc1:
* configure: Regenerate.
libffi:
* configure: Regenerate.
libga68:
* configure: Regenerate.
libgcobol:
* configure: Regenerate.
libgfortran:
* configure: Regenerate.
libgm2:
* configure: Regenerate.
libgomp:
* configure: Regenerate.
libgrust:
* configure: Regenerate.
libitm:
* configure: Regenerate.
libobjc:
* configure: Regenerate.
libphobos:
* configure: Regenerate.
libquadmath:
* configure: Regenerate.
libsanitizer:
* configure: Regenerate.
libssp:
* configure: Regenerate.
libstdc++-v3:
* configure: Regenerate.
libvtv:
* configure: Regenerate.
lto-plugin:
* configure: Regenerate.
zlib:
* configure: Regenerate.
In r15-3752-g48261bd26df624 I added a test plugin that overrode the
regular output, instead emitting diagnostics in crude HTML form.
In r15-4760-g0b73e9382ab51c I added support for multiple kinds of
diagnostic output simultaneously, adding
-fdiagnostics-add-output=DIAGNOSTICS-OUTPUT-SPEC
-fdiagnostics-set-output=DIAGNOSTICS-OUTPUT-SPEC
for adding/changing the kind of diagnostics output, supporting
"text" and "sarif" output schemes.
This patch promotes the HTML output code from the test plugins so
that it is available from "-fdiagnostics-add-output=", using a
new "experimental-html" scheme, to allow simultaneous text, sarif
and html output, and to make it easier to experiment with. The
patch adds Python-based testing of the emitted HTML.
The patch does not affect the generated HTML, which is still crude, and
not yet ready for end-users. I hope to improve it in followups.
gcc/ChangeLog:
PR other/116792
* Makefile.in (OBJS-libcommon): Add diagnostic-format-html.o.
* diagnostic-format-html.cc: Move here from
testsuite/gcc.dg/plugin/diagnostic_plugin_xhtml_format.cc.
Simplify includes. Rename "xhtml" to "html" throughout.
(write_escaped_text): Drop.
(class xhtml_stream_output_format): Drop.
(class html_file_output_format): Reimplement using
diagnostic_output_file.
(diagnostic_output_format_init_xhtml): Drop.
(diagnostic_output_format_init_xhtml_stderr): Drop.
(diagnostic_output_format_init_xhtml_file): Drop.
(diagnostic_output_format_open_html_file): New.
(make_html_sink): New.
(xhtml_format_selftests): Convert to...
(diagnostic_format_html_cc_tests): ...this.
(plugin_is_GPL_compatible): Drop.
(plugin_init): Drop.
* diagnostic-format-html.h: New file.
* doc/invoke.texi (-fdiagnostics-add-output=): Add
"experimental-html" scheme.
* opts-diagnostic.cc: Include "diagnostic-format-html.h".
(class html_scheme_handler): New.
(output_factory::output_factory): Add html_scheme_handler.
(html_scheme_handler::make_sink): New.
* selftest-run-tests.cc (selftest::run_tests): Call the new
selftests.
* selftest.h (selftest::diagnostic_format_html_cc_tests): New
decl.
gcc/testsuite/ChangeLog:
PR other/116792
* gcc.dg/plugin/diagnostic_plugin_xhtml_format.cc: Move to
gcc/diagnostic-format-html.cc.
* gcc.dg/html-output/html-output.exp: New support script.
* gcc.dg/html-output/missing-semicolon.c: New test.
* gcc.dg/html-output/missing-semicolon.py: New test script.
* gcc.dg/plugin/diagnostic-test-xhtml-1.c: Deleted test.
* gcc.dg/plugin/plugin.exp (plugin_test_list): Drop moved plugin
and its deleted test.
* lib/gcc-dg.exp (load_lib): Add load_lib of scanhtml.exp.
* lib/htmltest.py: New support script.
* lib/scanhtml.exp: New support script, based on scansarif.exp.
libatomic/ChangeLog:
PR other/116792
* testsuite/lib/libatomic.exp: Add load_lib of scanhtml.exp.
libgomp/ChangeLog:
PR other/116792
* testsuite/lib/libgomp.exp: Add load_lib of scanhtml.exp.
libitm/ChangeLog:
PR other/116792
* testsuite/lib/libitm.exp: Add load_lib of scanhtml.exp.
libphobos/ChangeLog:
PR other/116792
* testsuite/lib/libphobos-dg.exp: Add load_lib of scanhtml.exp.
libvtv/ChangeLog:
PR other/116792
* testsuite/lib/libvtv-dg.exp: Add load_lib of scanhtml.exp.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
I need to use this cleanup logic for the testsuite for libdiagnostics
where it's too awkward to directly use gcc-dg.exp itself.
No functional change intended.
gcc/testsuite/ChangeLog:
* lib/dg-test-cleanup.exp: New file, from material moved from
lib/gcc-dg.exp.
* lib/gcc-dg.exp: Add load_lib of dg-test-cleanup.exp.
(cleanup-after-saved-dg-test): Move to lib/dg-test-cleanup.exp.
(dg-test): Likewise for override.
(initialize_prune_notes): Likewise.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
libphobos/ChangeLog:
* testsuite/lib/libphobos-dg.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
libstdc++-v3/ChangeLog:
* testsuite/lib/libstdc++.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Add
"load_gcc_lib dg-test-cleanup.exp".
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Since r15-3254-g3f51f0dc88ec21c1ec79df694200f10ef85915f4
added scan-ltrans-rtl* variants to scanltranstree.exp, it no longer
makes sense to have "tree" in the name. This renames the file
accordingly and updates users.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Load scanltrans.exp instead of
scanltranstree.exp.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Load scanltrans.exp instead of
scanltranstree.exp.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Load scanltrans.exp instead of
scanltranstree.exp.
libphobos/ChangeLog:
* testsuite/lib/libphobos-dg.exp: Load scanltrans.exp instead of
scanltranstree.exp.
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Load scanltrans.exp instead of
scanltranstree.exp.
gcc/testsuite/ChangeLog:
* gcc.dg-selftests/dg-final.exp: Load scanltrans.exp instead of
scanltranstree.exp.
* lib/gcc-dg.exp: Likewise.
* lib/scanltranstree.exp: Rename to ...
* lib/scanltrans.exp: ... this.
A recent patch
commit bdc264a16e
Author: Alexandre Oliva <oliva@adacore.com>
Date: Thu May 30 02:06:48 2024 -0300
[testsuite] conditionalize dg-additional-sources on target and type
added two additional args to dg-additional-files-options.
Unfortunately, this completely broke several testsuites like
ERROR: tcl error sourcing /vol/gcc/src/hg/master/local/libatomic/testsuite/../../gcc/testsuite/lib/gcc-dg.exp.
wrong # args: should be "dg-additional-files-options options source dest type"
since the patch forgot to adjust some of the callers.
This patch fixes that.
Tested on i386-pc-solaris2.11, sparc-sun-solaris2.11, and
x86_64-pc-linux-gnu.
2024-05-31 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
libatomic:
PR testsuite/115294
* testsuite/lib/libatomic.exp (libatomic_target_compile): Pass new
dg-additional-files-options args.
libgomp:
PR testsuite/115294
* testsuite/lib/libgomp.exp (libgomp_target_compile): Pass new
dg-additional-files-options args.
libitm:
PR testsuite/115294
* testsuite/lib/libitm.exp (libitm_target_compile): Pass new
dg-additional-files-options args.
libphobos:
PR testsuite/115294
* testsuite/lib/libphobos.exp (libphobos_target_compile): Pass new
dg-additional-files-options args.
libvtv:
PR testsuite/115294
* testsuite/lib/libvtv.exp (libvtv_target_compile): Pass new
dg-additional-files-options args.
Like in r12-7519-g027e30414492d50feb2854aff38227b14300dc4b, I've done
git grep -v 'long long\|optab optab\|template template\|double double' | grep ' \([a-zA-Z]\+\) \1 '
This is just part of the changes, mostly for non-gcc directories.
I'll try to get to the rest soon. Obviously, the above command also
finds cases which are correct as is and shouldn't be changed, so one
needs to manually inspect everything.
I'd hope most of it is pretty obvious, but the config/ and libstdc++-v3/
hunks include a tweak in a license wording, though other copies of the
similar license have the wording right.
2024-04-02 Jakub Jelinek <jakub@redhat.com>
* Makefile.tpl: Fix duplicated words; returns returns ->
returns.
config/
* lcmessage.m4: Fix duplicated words; can can -> can,
package package -> package.
libdecnumber/
* decCommon.c (decFinalize): Fix duplicated words in
comment; the the -> the.
libgcc/
* unwind-dw2-fde.c (struct fde_accumulator): Fix duplicated
words in comment; is is -> is.
libgfortran/
* configure.host: Fix duplicated words; the the -> the.
libgm2/
* configure.host: Fix duplicated words; the the -> the.
libgomp/
* libgomp.texi (OpenMP 5.2): Fix duplicated words; with with ->
with.
(omp_target_associate_ptr): Fix duplicated words; either either ->
either.
(omp_init_allocator): Fix duplicated words; be be -> be.
(omp_realloc): Fix duplicated words; is is -> is.
(OMP_ALLOCATOR): Fix duplicated words; other other -> other.
* priority_queue.h (priority_queue_multi_p): Fix duplicated words;
to to -> to.
libiberty/
* regex.c (byte_re_match_2_internal): Fix duplicated words in comment;
next next -> next.
* dyn-string.c (dyn_string_init): Fix duplicated words in comment;
of of -> of.
libitm/
* beginend.cc (GTM::gtm_thread::begin_transaction): Fix duplicated
words in comment; not not -> not to.
libobjc/
* init.c (duplicate_classes): Fix duplicated words in comment; in in
-> in.
* sendmsg.c (__objc_prepare_dtable_for_class): Fix duplicated words
in comment; the the -> the.
* encoding.c (objc_layout_structure): Likewise.
libstdc++-v3/
* acinclude.m4: Fix duplicated words; file file -> file can.
* configure.host: Fix duplicated words; the the -> the.
libvtv/
* vtv_rts.cc (vtv_fail): Fix duplicated words; to to -> to.
* vtv_fail.cc (vtv_fail): Likewise.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
These are the os support patches we have been grooming and maintaining
for quite a few years over on git.haiku-os.org. All of these
architectures are working and most have been stable for quite some time.
ChangeLog:
* configure: Regenerate.
* configure.ac: Add Haiku to list of ELF OSes
* libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
ChangeLog:
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog:
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
fixincludes/ChangeLog:
* configure: Regenerate.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
ChangeLog:
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/ChangeLog:
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
The loongarch64 specification permits page sizes of 4KiB, 16KiB and 64KiB,
but only 16KiB pages are supported for now.
Co-Authored-By: qijingwen <qijingwen@loongson.cn>
include/ChangeLog:
* vtv-change-permission.h (defined): Determines whether the macro
__loongarch_lp64 is defined
(VTV_PAGE_SIZE): Set VTV_PAGE_SIZE to 16KiB for loongarch64.
libvtv/ChangeLog:
* configure.tgt: Add loongarch support.
This change adds the configury bits to activate the build of
shared libs on VxWorks ports configured with --enable-shared,
for libraries variants where this is generally supported (rtp,
code model !large - currently not compatible with -fPIC).
Set lt_cv_deplibs_check_method in libtool.m4, so the build of
libraries know how to establish dependencies. This is useful in
configurations such as aarch64 where proper support of LSE relies
on accurate dependency information between libstdc++ and libgcc_s
to begin with.
Regenerate configure scripts to reflect libtool.m4 change.
2022-10-09 Olivier Hainque <hainque@adacore.com>
* libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker
and friends for rtp !large. Assume the linker has the required
abilities and set lt_cv_deplibs_check_method.
gcc/
* config.gcc (*vxworks*): Add t-slibgcc fragment
if enable_shared.
libgcc/
* config.host (*vxworks*): When enable_shared, add
libgcc and crtstuff "shared" fragments for rtp except
large code model.
(aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from
the list of fragments.
2022-10-09 Olivier Hainque <hainque@adacore.com>
gcc/
* configure: Regenerate.
libatomic/
* configure: Regenerate.
libbacktrace/
* configure: Regenerate.
libcc1/
* configure: Regenerate.
libffi/
* configure: Regenerate.
libgfortran/
* configure: Regenerate.
libgomp/
* configure: Regenerate.
libitm/
* configure: Regenerate.
libobjc/
* configure: Regenerate.
liboffloadmic/
* configure: Regenerate.
liboffloadmic/
* plugin/configure: Regenerate.
libphobos/
* configure: Regenerate.
libquadmath/
* configure: Regenerate.
libsanitizer/
* configure: Regenerate.
libssp/
* configure: Regenerate.
libstdc++-v3/
* configure: Regenerate.
libvtv/
* configure: Regenerate.
lto-plugin/
* configure: Regenerate.
zlib/
* configure: Regenerate.
The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
gcc/ChangeLog:
PR target/97865
* configure: Regenerate.
libatomic/ChangeLog:
PR target/97865
* configure: Regenerate.
libbacktrace/ChangeLog:
PR target/97865
* configure: Regenerate.
libffi/ChangeLog:
PR target/97865
* configure: Regenerate.
libgfortran/ChangeLog:
PR target/97865
* configure: Regenerate.
libgomp/ChangeLog:
PR target/97865
* configure: Regenerate.
libhsail-rt/ChangeLog:
PR target/97865
* configure: Regenerate.
libobjc/ChangeLog:
PR target/97865
* configure: Regenerate.
libphobos/ChangeLog:
PR target/97865
* configure: Regenerate.
libquadmath/ChangeLog:
PR target/97865
* configure: Regenerate.
libssp/ChangeLog:
PR target/97865
* configure: Regenerate.
libstdc++-v3/ChangeLog:
PR target/97865
* configure: Regenerate.
libvtv/ChangeLog:
PR target/97865
* configure: Regenerate.
zlib/ChangeLog:
PR target/97865
* configure: Regenerate.
